TEMBO® Liners for Water Harvesting and Fish Farming.

Strong, durable and designed to customer specifications, our liners are made to eliminate problems of leakage and evaporation in dams and ponds. Manufactured to our client’s specific requirements, our liners are produced from durable and strong materials to establish your dam/pond as a long term property asset. Our versatile range of liners are also greatly used in an array of different applications such as rural, commercial, aquaculture and mining projects. Made from a variety of high puncture resistant materials, it prevents contamination and allows retention and treatment. A permanent and cost-effective barrier to create new, low maintenance and easy to install waterproof reservoir bodies.

Our ready to install TEMBO® Liners are also providing a very beneficial solution to farmers, allowing them to build their own dams to harvest water for their irrigation needs. This allows farmers to have ample water for more than one season of their crop and also reduce their reliance on weather pattern, improving food security and sustaining income of the farmers. Installation is relatively simple and farmers also utilize the same liners for fish farming, a very lucrative side business for them.
 

SPECIFICATIONS:

  • UV PROTECTED

  • Tough and long lasting

  • THICKNESS: 0.5MM | 0.8MM | 1.0MM

POND / DAM LINER CALCULATOR:

ENTER YOUR MEASUREMENTS BELOW (ALL MEASUREMENTS ARE IN METRES)


HOW WE CALCULATE THE ABOVE VALUES:

To calculate the total size of pond liner required is quite simple. It is just the maximum size of the pond with the depth and edges taken into account. The pond liner should never be stretched, so it is always safer to allow a little extra. Here is a simple example to explain.

Diagram.png

THE LINER LENGTH NEEDED IS EQUAL TO:

maximum Pond Length
plus 2 x The Maximum Depth
plus 2 x The Amount Of Edging Needed++
(We Recommend a Minimum Edging of 300 mm per side)

An example is a 3m long x 2 m wide and 0.5m deep pond. Using the above equation, the amount of material required is: the length 3 + (2 x 0.5m depth) + (2 x 0.3m edging) = 4.6m. So 4.6m is required in the length of the pond liner.

THE LINER WIDTH IS EQUAL TO:

Maximum Pond Width
plus 2 x The Maximum Depth
plus 2 x The Amount of Edging Needed++
(Recommend a Minimum Edging of 300 mm per side)

Using the same example as above (3m long x 2m wide and 0.5m deep), the amount of material required is:
the width 2 + (2 x 0.5m depth) + (2 x 0.3m edging) = 3.6m. So 3.6m is required in the width of the pond liner.

 *The amount of edging you use is up to you, but we recommend at least 300 mm.

This being the case, a flat sheet required to suit a 3m long x 2 m wide at 0.5m deep will need to measure a minimum of 4.6m long x 3.6m wide.